$75/25g
$158/100g
$388/500g
$588/1kg
$1,595/5kg
$2,595/10kg
$3,999/25kg
$5,999/50kg
Please contact us for quotes on larger quantities.
Stock#: US4885
Details
The Product Making Method Steps:
1) Carbon nanotubes are sufficiently dispersed in the molten state polypropylene (Homopolymer) resin matrix.
2) Mixed thoroughly.
3) Cooling.
4) Cutting--Granular--for better use of this material.
CNTs Purity: 95%
Outside Diameter: >50nm
Inside diameter: 5-15nm
Length: 5-20um
CNTs Content: 20wt%
Polypropylene (Homopolymer) Resin Matrix: 80wt%
Product Significant Advantages:
Excellent wear resistance; Not oozing; Not falling off; Satisfing electronic products clean requirements; Good stability and controllability for electrical resistivity by changing the amount of the use of the composite material; Excellent impact resistance--Using the product can be significantly improved the impact strength of the composite material, and do not cause tensile and bending strength lowered; Meet customer's need for antistatic properties and mechanical properties requirements; When preparing a flame retardant antistatic composite material, the use of conductive carbon black will reduce the flame retardant rating of the material, while the use of carbon nanotubes will improve the material flame retardant grade....
Testing Resistivity Experimental Parameters:
1) To dilute the product by using polypropylene (Homopolymer) resin matrix to normal usage concentration: CNTs 2wt%, CNTs 2.5wt%, CNTs 3wt%, CNTs 3.5wt%. 2) Molding, specimen thickness of 1.5mm, the testing standards GB / T 1410-2006, test voltage 100V.
|
CNTs Content
|
2wt%
|
2.5wt%
|
3wt%
|
3.5wt%
|
|
Volume Resistivity (ohm.cm)
|
>1014
|
3.4×108
|
3.3×106
|
1.9×106
|
|
Surface Resistivity (ohm)
|
1.6×1013
|
1.1×107
|
2.2×106
|
1.4×106
|
Testing the Product Comprehensive Performance Experimental Parameters:
1) To dilute the product by using polypropylene (High Impact Copolymer) resin matrix to special usage concentration: CNTs 0wt%, CNTs 6wt%, CNTs 8wt%, CNTs 10wt%. 2) Injection molding, specimen thickness: 2.2mm, electrical properties test standard: GB/T1410-2006, test voltage: 100V, tensile test standards: GB / T 1040-2006, bending test standard: GB / T 9341-2000, Izod impact testing standards: GB / T 1843-96.
|
CNTs Content
|
0wt% (Homopolymer 50%/Copolymer 50%)
|
6wt% (Homopolymer 44%/Copolymer 50%)
|
8wt% (Homopolymer 42%/Copolymer 50%)
|
10wt% (Homopolymer 40%/Copolymer 50%)
|
|
Volume Resistivity (ohm.cm)
|
>1014
|
>1014
|
8.7×109
|
4.5×107
|
|
Surface Resistivity (ohm)
|
>1014
|
>1014
|
3.1×1010
|
5×107
|
|
Tensile Strength (MPa)
|
28.1
|
30
|
31.2
|
30.2
|
|
Stain at break (%)
|
49.4
|
46.9
|
43.6
|
41.4
|
|
Izod Notched Impact Strength (KJ/m2)
|
9.2
|
18.4
|
33.4
|
47.3
|
|
Flexural Strength (MPa)
|
33.7
|
34.5
|
34.2
|
33.4
|
|
Flexural Modulus (MPa)
|
1139
|
1266
|
1254
|
1196
|
|
Melt Index (g/10min, 2.16Kg/230oC)
|
12.3
|
2.2
|
1.92
|
1.77
|
Note:
Using different test voltage will get different resistivity.
Using different roughness surface will get different resistivity.
Using different injection molded thickness will get different resistivity.
SDS
Related Products: CNTs-HDPE; CNTs-LLDPE; CNTs-HIPS; CNTs-PP
Order | |
